Top 10 Ninja Nutri Ninja Bl 2013
Finding your suitable readers for ninja nutri ninja bl 2013 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for ninja nutri ninja bl 2013 including detail information and customer reviews. Let’s find out which is your favorite one.
549 reviews analysed
Ninja Blender Replacement Parts Ninja Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (Blade 7 Fins)
- Ninja Blade Apply to 7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- Nutri Ninja Replacement Parts Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- Important Tips Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- Packing Include 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 100% SATISFACTION GUARANTEE If you are buying before or after purchase any questions, please feel free to contact us, we’ll issue you a full refund or replacement.
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Ninja Blender Bottom Blade 7 Fins For Nutri Ninja Pro Extractor Blade Nutri Ninja Auto iQ BL480-30 BL482 BL642 NN102 BL682 BL2013 BL640 BL642Z BL480D, Nutri Ninja Blender Auto iQ Blade
- 【Bottom Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【 Replacement Parts for Nutri Ninja 】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 3 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【Risk-free Purchase】 The warranty is 12 Months. We will issue full refund if you are not satisfied with the products.If there is any problem with the product, please contact us in time, we will promptly replace it for you or make a full refund.
Blender Bottom Blade (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it 3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line 5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly 7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Blender Replacement Parts for Ninja, Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (7 fins)
- 【Blade Apply toNinja 】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing)
- 【 Replacement Parts for Ninja parts 】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made ofmade of food grade stainless steel, high hardness, not easy to break, no gap.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 1 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【Desiged for】: NN101-30, BL486CO, BL482-30, BL482, BL685-30, BL682, BL455-30, CT680SS, CT680CO2SS, BL487A, BL680A, BL487, BL682-30, BL450-30, BL642, BL640, BL642-30, BL480, BL455, BL491, BL641, BL681A, BL680A-30, BL492, BL687CO, BL641-30, BL485, BL481,etc.
SunnyMemory Blender Replacement Parts for Ninja 7 Fins Bottom Blade, 1 replacement blade, 2 Gaskets, 1 Gasket Pick for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Blade
- 1.Compatible Blender Model: Nutri Ninja Auto iQ BL2012, BL2013, BL455, BL455-30, BL480, BL480D, BL481, BL482, BL482-30, BL685-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492, BL492W, BL640, BL641, BL641-30, BL642, BL642-30, BL642W, BL642Z, BL450-30, BL680A, BL485, BL680A-30, BL681A, BL682, BL682-30, BL687CO, NN100, NN100A, NN101, NN102, NN101-30, BL2012, CT680SS, CT680CO2SS.
- 2.Please don’t buy this bottom blade for the blender model: BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70.
- 3.Premium Material Only: Anti-corrosive food-grade stainless steel bottom blade, sharper and durable, easy to handle frozen food and nuts. Please wipe it dry when you rinse it after use. It will extend the service life of the replacement part.
- 4.Warm Note: The rubber gasket in bottom blade might be loosened during transportation. Before using the bottom blade, please kindly check the rubber gasket and make sure that it is put snugly into the replacement bottom blade.
- 5.Package includes: 1 X Bottom Blade for Ninja(7 Fin), 2 X Extra Gaskets, 1 X Gasket remover tool. We will respond to you within 24 hours. Please feel free to contact us at any time if you have questions.
Compatible Blender Model: Nutri Ninja Auto iQ BL2012, BL2013, BL455, BL455-30, BL480, BL480D, BL481, BL482, BL482-30, BL685-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492, BL492W, BL640, BL641, BL641-30, BL642, BL642-30, BL642W, BL642Z, BL450-30, BL680A, BL485, BL680A-30, BL681A, BL682, BL682-30, BL687CO, NN100, NN100A, NN101, NN102, NN101-30, BL2012, CT680SS, CT680CO2SS.
Not Compatible with the Blender Model:BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70.
Product Package
1 X Replacement Bottom Blade
3 X Replacement Rubber Gasket(One is already on the bottom blade)
1 X Gasket Pick
24-hour after-sales service We will respond to you and solve your problems within 24 hours. Thank you for your support.
Blender Replacement Parts Ninja Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (7 fins)
- 【Ninja Blade Apply To】The 7 Fins Ninja Blade is suitable for Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz).
- 【Important Note】Note 1: The Rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note 2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【NOT COMPATIBLE】 IF ¡°DOB¡± is listed after the model number on the base of the blander food grade PP and stainless steel .
- 【Nutri Ninja Replacement Parts】 – Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel .
- 【Packing Include】1 x 7 Fins Bottom Blade Replacements, 1 x Extra Gasket Rubbers (Please make sure your Ninjia blender base has 7 fins before order.)
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.
Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
BEFORE PURCHASING please check your existing blade for the following:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
Pay attention to before use:
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
2 Pack Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 7 Fins Replacement Extractor Blades Part for Nutri Ninjia Blender Blade fits Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013
- ????【 Apply to】: The 7 Fins Ninja Blade is suitable for Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup, Not fit for 16oz).
- ????【High Quality 】: 7 Fins Replacement Parts With Size: 3.94″/10cm Diameter, 165g
- Ninja Extractor Replacement Blade is made of Food-grade BPA material & stainless steel, high hardness brings qualified anti-corrosion performance
- Moreover, theouter is made of durable PP material, Not easy to break and scrape.
- ???? 【Giving You Healthy Life 】: Ninja blender blade 7 fin is the ideal replacement blade for nutri ninja,It make your juicer reuse again and perfect for all your blending and mixing needs, effortlessly pulverizes fruits, vegetables, superfoods and protein shakes into a delicious, smooth texture.
- ????【Save More Money】: Good replacement part for blender blade, saves money and helps make healthy cooking easier.Every morning, you will be able to enjoy a healthy glass of juice and start a beautiful day.
- ????【Packing Include】2 *7 Fins Bottom Blade Replacements, 2 * Extra Gasket Rubbers , ( Two Gasket Rubber has Pre-installed in the 7 fins replacement blade) Please make sure your Ninjia blender base has 7 fins before order !!!
Ninja Blender Replacement Parts Ninja Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (7 fins)
- 【Ninja Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing)
- 【Nutri Ninja Replacement Parts】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【100% SATISFACTION GUARANTEE】 If you are buying before or after purchase any questions, please feel free to contact us, we’ll issue you a full refund or replacement.
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage)
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
SunnyMemory 5PCS Replacement Gaskets for Ninja 7 fin replacement blade with 1 X Gasket Pick for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013
- 1.High Quality Silicone: Made of food grade silicone, durable and pure. Great seal and fits snugly.
- 2.Bottom Bade Gasket Selection for your blender Model number: Nutri Ninja Auto iQ BL2012, BL2013, BL455, BL455-30, BL480, BL480D, BL481, BL482, BL482-30, BL685-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492, BL492W, BL640, BL641, BL641-30, BL642, BL642-30, BL642W, BL642Z, BL450-30, BL680A, BL485, BL680A-30, BL681A, BL682, BL682-30, BL687CO, NN100, NN100A, NN101, NN102, NN101-30, BL2012, CT680SS, CT680CO2SS.
- 3.Please don’t buy this bottom blade for the blender model: BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70.
- 4.Package includes: 5 X Replacement Gaskets, 1 X Gasket Pick.
- 5.Great after sales service: We will respond and solve your questions within 24 hours. Please fee free to contact us at any time.
5PCS Replacement Gaskets for Ninja 7 fin replacement blade with 1 X Gasket Pick for Nutri Ninja Auto iQ AMZ012BL, BL2012, BL2013, BL450, BL454Q, BL456, BL480, BL480D, BL481, BL482, BL486CO, BL487, BL487A, BL487Q, BL488W, BL490, BL491, BL492, BL492W, BL494, BL494C, BL640, BL641, BL642, BL642W, BL642W1, BL642Z, BL680, BL680A, BL682, BL682W, BL687CO, BL910, CT640C, CT641, CT641, CT680A, CT680CO2SS, CT680SS, CT680SSCCO, CT680W, CT682SP, NN100, NN100A, NN101, NN102, NN210, NN210C.
7 Fins Replacement Blade Parts for Nutri Ninja Blender, Extractor Bottom Blade for Auto iQ BL682 BL2013 BL480D BL642 NN102 and More (1PCS)
- Compatible models: 7-fin blender parts replacement is suitable for Nutri Ninja Blender, only for the following models- ,BL482-30, BL486, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL680A, BL682,BL2012, BL2013, BL450, BL451, BL454, BL456, BL480, BL480D, BL481,NN100, NN100A, NN101, NN102
- Note:The blender blade replacement has two models-6fins and 7 fins. The replacement model of our blade is 7fins.Please note that your machine base is 7fins before purchasing
- High-quality materials: The blade replacement of the ninja blender is made of food-grade BPA plastic and high-strength stainless steel blades. Odorless, non-oxidizing, reusable mixer blade, built-in rubber gasket, will not leak.
- Reminder: Note 1: Be careful of the blade when opening the package. Note 2: If you want to use this replacement gasket, please remove the pre-installed gasket in the bottom blade! Note 3: Pay attention to compatible models before purchasing
- After-sales service: We provide 100% satisfactory service to all customers. If you encounter any problems in use, please contact us to help you solve them.
Compatible Models:
7Fins
CT640,CT641,CT680,CT680A,CT680W,CT680SS
NN100,NN100A,NN101,NN101-30,NN102,NN210
BL480-30,BL481-30,BL482-30,BL483-30
BL485,BL486CO,BL487,BL487A,BL487T,BL487CO,BL488W
BL490,BL491,BL492,BL492W,BL493,BL494,BL494C
BL641,BL680A,BL680A-30,BL682,BL682-30,BL682W
BL2012,BL2013
BL450-30,BL454Q
Not Fit :
6Fins
BL480, BL480-70,BL480D 30,BL480w-70
BL450, ,BL450-70, BL451-70, BL454-70,BL455-70
BL481-70,BL482-70,BL483-70,BL484-70
BL740, BL770. BL771, BL772, BL773CO, BL780
BL810, BL820, BL830
BL660, BL663, BL685-30
Package Include:
1x Gasket Rubber
1 x 7 Fins Ninja Blender Blade replacement
AxPower 7 Fins Extractor Blades Replacement Part Bottom Blade for Ninjia Blender for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 and More(2 Pack, 7 Fins)
- 【APPLY TO】The 7 fins extractor blade is suitable for Nutri Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz). Please make sure your Ninjia blender base has 7 fins before order.
- 【HIGH QUALITY】The high-speed blade is made of food-grade stainless steel, high hardness brings qualified anti-corrosion performance. Moreover, the outer is made of durable PP material, not easy to break and scrape.
- 【IMPORTANT NOTE】Note1: The rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【PACKAGE INCLUDED】 2 x 7 Fins Bottom Blade Replacements, 2 x Extra Gasket Rubbers and 1 x Cleaning Brush as a gift.
- 【BUY WITH CONFIDENCE】Thank you so much for your great support on us. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can.
Conclusion
By our suggestions above, we hope that you can found Ninja Nutri Ninja Bl 2013 for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Ninja Nutri Ninja Bl 2013, eg:
- What are Top 10 Ninja Nutri Ninja Bl 2013 for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Ninja Nutri Ninja Bl 2013 to buy?
- What are Top Rated Ninja Nutri Ninja Bl 2013 to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Ninja Nutri Ninja Bl 2013?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Ninja Nutri Ninja Bl 2013.
- Before deciding to buy any Ninja Nutri Ninja Bl 2013, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Ninja Nutri Ninja Bl 2013 and What you should consider when buying the Ninja Nutri Ninja Bl 2013 and Where to Buy or Purchase the Ninja Nutri Ninja Bl 2013. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Ninja Nutri Ninja Bl 2013 of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Ninja Nutri Ninja Bl 2013.